Water evaporator radiator - WC-WAT300

Post Reply
Blasttiod
Posts: 12
Joined: Fri Aug 03, 2012 3:43 am
Contact:

Water evaporator radiator - WC-WAT300

Post by Blasttiod »

Hi Marco,
Just going to order the radiator(WC-WAT300) from you and a fan(s)/tubing. My chillers packed up and they are not cheap to replace.

Can you just tell me:
I see you mention that a 15cm fan is suited. Does the radiator have fixings for the 15cm fan?(if not then I might get two of your 12cm ultra strong 200cfm fans instead. That way i can use either both fans on at once or just 1 fan depending on how warm the water gets)
Also are there connections on the radiator for the tubing to go onto?

Regards
Kevin
Tech_Marco
Posts: 4654
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: Water evaporator radiator - WC-WAT300

Post by Tech_Marco »

See image

What's wrong with your water chiller? How big of your tube?
If you're running 60W or lower, you may use a water radiator. But anything bigger or tube need to run long operation, then a water chiller is better


Marco
Attachments
WaterRadiatorDimension.jpg
Blasttiod
Posts: 12
Joined: Fri Aug 03, 2012 3:43 am
Contact:

Re: Water evaporator radiator - WC-WAT300

Post by Blasttiod »

Hi Marco,
Thankyou for your reply.

Does the radiator come with the connections for the silicon tubing?
Also will your' Monster 15cm fan' you sell screw straight onto the radiator.

Regards
Kevin
Tech_Marco
Posts: 4654
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: Water evaporator radiator - WC-WAT300

Post by Tech_Marco »

That should work if I'm not forgotten. I believed that I tried it once before.I can double check on Monday

Marco
ivantandy
Posts: 51
Joined: Tue Feb 12, 2013 9:04 pm
Location: CANADA
Contact:

Re: Water evaporator radiator - WC-WAT300

Post by ivantandy »

The monster fan I bought from LO did not fit the radiator's threaded bosses... I was unable to get marco to do anything about it. he just stated the manufacturer changed the product.
Blasttiod
Posts: 12
Joined: Fri Aug 03, 2012 3:43 am
Contact:

Re: Water evaporator radiator - WC-WAT300

Post by Blasttiod »

Hi Ivan,
Thanks for letting me know.
Other than that does the radiator cool the water enough and did it come with the tube fittings on?

Regards
Kevin
Tech_Marco
Posts: 4654
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: Water evaporator radiator - WC-WAT300

Post by Tech_Marco »

The monster fan didn't fit after trying today
Only the AC fan will fit. I can det you AC220V fan

There is no special fitting included. It is copper wire with 8mm diameter(need to measure to confirm). Silicon tubing will do the job well though


Marco
Tech_Marco
Posts: 4654
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: Water evaporator radiator - WC-WAT300

Post by Tech_Marco »

AC fan fit WC-WAT300 water radiator
Not in stock, special order only

Marco
Attachments
ACFanFP-108EX.jpg
Post Reply

Return to “CO2 Laser Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests