HellO !
Someone he knows the password of macros for coreldraw and AutoCad ! I would like to translate into French for simplicity !
Thank you very much !
Password CorelDraw macros
-
- Posts: 3
- Joined: Mon Aug 02, 2010 7:18 am
- Contact:
-
- Posts: 288
- Joined: Sun May 23, 2010 6:40 pm
- Location: Broken Hill, NSW, Australia
- Contact:
Re: Password CorelDraw macros
Not sure which password you need but here are the ones Marco posted a while ago
811104 (Master key code to release demo time)
gxfc88 (Write machine info to configuration file)
Rich.
811104 (Master key code to release demo time)
gxfc88 (Write machine info to configuration file)
Rich.
-
- Posts: 15
- Joined: Thu Jun 17, 2010 12:33 pm
- Location: Latvia
- Contact:
Re: Password CorelDraw macros
I would like to translate corel draw plugin too. My native is Russian.
-
- Posts: 2
- Joined: Sat Jul 31, 2010 2:03 pm
- Contact:
Re: Password CorelDraw macros
For translation the password for VB-Editor to open the macro is needed.
The Passwords stated above don´t work...posting.php?mode=reply&f=8&t=279#
The Passwords stated above don´t work...posting.php?mode=reply&f=8&t=279#
-
- Posts: 3
- Joined: Mon Aug 02, 2010 7:18 am
- Contact:
Re: Password CorelDraw macros
Hello !
The code does not work gxfc88. I tried to crack the code with a hex editor I get to have a small part of the source code only and not re-register ..
Nobody knows the code that works ?
The code does not work gxfc88. I tried to crack the code with a hex editor I get to have a small part of the source code only and not re-register ..
Nobody knows the code that works ?
-
- Posts: 12
- Joined: Fri Sep 10, 2010 10:09 am
- Contact:
Re: Password CorelDraw macros
Hello,
I changed the Password for the GSM-File. It is now "start". replace the GSM-File with the attached and try.
I tryed also to translate the Shield.
But it is not in the Plug-In for Corel. The Plugin only export the data to the RLaser.exe. I thin you should try to open theis file and translate it there.
If someone finds a way.
Please let me know.
I changed the Password for the GSM-File. It is now "start". replace the GSM-File with the attached and try.
I tryed also to translate the Shield.
But it is not in the Plug-In for Corel. The Plugin only export the data to the RLaser.exe. I thin you should try to open theis file and translate it there.
If someone finds a way.
Please let me know.
-
- Posts: 3
- Joined: Mon Aug 02, 2010 7:18 am
- Contact:
Re: Password CorelDraw macros
Hello!
I come with good news! Looking in the hexadecimal code of the executable TZsetup.exe I realized that all the text were gathered in one place in the form: 1 = Open Trans Err £ º ¡£ 2 = failure Trans Com Err error £ º £ ¡. ...
And just before this paragraph is something I entangled "eng.txt.dll" I made a
search on my pc a file eng.txt and I found it ! in:
CorelDRAW Graphics Suite X4/Programs/eng.txt
Just translate it !!!!
Excuse me for my English very poor .. And good translation !
I come with good news! Looking in the hexadecimal code of the executable TZsetup.exe I realized that all the text were gathered in one place in the form: 1 = Open Trans Err £ º ¡£ 2 = failure Trans Com Err error £ º £ ¡. ...
And just before this paragraph is something I entangled "eng.txt.dll" I made a
search on my pc a file eng.txt and I found it ! in:
CorelDRAW Graphics Suite X4/Programs/eng.txt
Just translate it !!!!
Excuse me for my English very poor .. And good translation !
Who is online
Users browsing this forum: No registered users and 9 guests