DSP Panel Flashes On and Off.
Posted: Sun Dec 11, 2011 9:20 pm
Hi All
Today I found that when I run my machine heavily the DSP control panel flashes on/off.
What I found is if I disconnect the 240 volts to the Laser Power Supply the problem stopped.
Maybe the DSP panel itself needs its on Power Supply.
I will investigate this further.
cheers Ian
Today I found that when I run my machine heavily the DSP control panel flashes on/off.
What I found is if I disconnect the 240 volts to the Laser Power Supply the problem stopped.
Maybe the DSP panel itself needs its on Power Supply.
I will investigate this further.
cheers Ian