Laser tube test: revesed HV and the Gnd connection
Posted: Sat Dec 13, 2014 10:23 am
Tips of the day
What would happen if by mistake we reversed the connection on the laser tube
I intentionally connected HV and Gnd wire reversed and wanted to see what would happen.
Guess what: It fire laser!
I tested it on a used 40W tube. I will try the test again on a 80W sometimes next week
Marco
What would happen if by mistake we reversed the connection on the laser tube
I intentionally connected HV and Gnd wire reversed and wanted to see what would happen.
Guess what: It fire laser!
I tested it on a used 40W tube. I will try the test again on a 80W sometimes next week
Marco