Page 1 of 1
Monster XY stage 4Mx2.5m( 13.2ft x 8.25ft)
Posted: Sun Nov 02, 2014 10:16 am
by Tech_Marco
I received two set of monster XY stage with size 4Mx2.5M. I'm building it now and will post pictures and video once completed.
Attached pictures showing the actual for review. See the keyboard?!
Marco
Re: Monster XY stage 4Mx2.5m( 13.2ft x 8.25ft)
Posted: Sun Nov 02, 2014 12:58 pm
by NickWL
What size and power is the laser tube going to be? and will it be mounted on the x-beam?
Tell all!
Nick
Re: Monster XY stage 4Mx2.5m( 13.2ft x 8.25ft)
Posted: Sun Nov 02, 2014 1:47 pm
by Tech_Marco
The laser tube mounted on the gantry (tube riding) and you can put any size like 80W,100W,130W, or 150W. All your choice. This XY stages used on big machine dedicated for cutting even thought it can do Engraving at 300mm/s. Motors are "86" series and it is 2phase. The XY runs on linear guide so it provide more precise cutting than Y wheel type (roller riding on 4mm steel rod.
Machine at this size usually cost over $35,000. I am selling the this stage for just $2,850
Marco