Page 1 of 1
connecting 40w co2 laser tube?
Posted: Tue Jul 16, 2013 2:52 pm
by Fabricio_pereira
Hello forum friends ... 1 year'm following the topics of this forum, I found very information rich.
Well now is the time I have a K40 and now I will do the conversion it soon
I would like to help someone ... how do I test the laser tube
I already have the hoses, tubing, fountain, water bucket.
if someone help me I am grateful
att
Fabricio
(Brazil)
Re: connecting 40w co2 laser tube?
Posted: Tue Jul 16, 2013 9:28 pm
by Things
Do you have the power supply for it? You will need one to power it up.
Re: connecting 40w co2 laser tube?
Posted: Wed Jul 17, 2013 2:48 am
by waltfl
Hi there
if you fill the tube with cooling water ( distilled water only) make sure that there are not air bubbles inside the tube or you destroy the tube.
I not clear if you got aK40 what do you wana do??? there is already all build in.
greetings
waltfl
Fabricio_pereira wrote:Hello forum friends ... 1 year'm following the topics of this forum, I found very information rich.
Well now is the time I have a K40 and now I will do the conversion it soon
I would like to help someone ... how do I test the laser tube
I already have the hoses, tubing, fountain, water bucket.
if someone help me I am grateful
att
Fabricio
(Brazil)
Re: connecting 40w co2 laser tube?
Posted: Wed Jul 17, 2013 3:37 pm
by Fabricio_pereira
Hi .. thanks for the feedback ...
THINGS...Yes I have power supply (I'll attach some photos below.)
if you can tell me I am grateful
WALTFL On the water ... I tested using ordinary water, but the water which would be the best?
- Distilled water for laboratory
- Deionized water
...I noticed when I received my tube that was broken part of the piece where the mirror cools did a repair. (I'll attach some photos below.)
... and also will buy new electronics for lightobject ... DSP Kit
if friends can help me I appreciate.
(sorry my ingles is by google translator, it is viable only means of communication.)
Re: connecting 40w co2 laser tube?
Posted: Wed Jul 17, 2013 4:23 pm
by Fabricio_pereira
....I did more drawings to better understand ... correct me if I'm wrong.
thank you...
Re: connecting 40w co2 laser tube?
Posted: Wed Jul 17, 2013 4:34 pm
by Tech_Marco
Download the laser power connection diagram from this location:
download/file.php?id=32
You need to get a 5K or 10K potentiometer (VR) for power adjustment if you're not using DSP.
Marco
Re: connecting 40w co2 laser tube?
Posted: Thu Jul 18, 2013 4:27 pm
by Fabricio_pereira
MARCO!
this piece is the K40 ... 40w laser tube is with these pieces I can do the installation?
and also I did not understand the means of connecting the power supply ... I will attach another picture.
if we speak
big hug!
Re: connecting 40w co2 laser tube?
Posted: Thu Jul 25, 2013 9:25 am
by Fabricio_pereira
please...
Re: connecting 40w co2 laser tube?
Posted: Thu Jul 25, 2013 1:07 pm
by Tech_Marco
Did you see the link I sent you from my last reply?
That show you the connection of connrcting a power supply. You don't understand it?
Marco
Re: connecting 40w co2 laser tube?
Posted: Thu Jul 25, 2013 3:21 pm
by Fabricio_pereira
yeah I looked at the link but I did not, because I'm not techno for translate. But it would be better for me to see some photos better.
ah ... I sent an email to you and not returned on Kit DSP.
Thanks for everything!
Re: connecting 40w co2 laser tube?
Posted: Sat Jul 27, 2013 8:51 pm
by Tech_Marco
Send email about your question for the DSP kit please as I couldn't locate it in my mail boxes. Too many mails coming daily so sometimes I may over-sighted it.
Marco