Last year we built a 120watt laser and it has performed flawless. Out of the blue this week it started to cut odd on one of the jobs that is saved on the DSP Controller. We have cut this job hundreds of times over the year with never a issue. Now the top cut is all wavey but the other 3 sides of the rectangle are just fine. Got me baffled!!
download/file.php?mode=view&id=3719
download/file.php?mode=view&id=3720
Laser is cutting one jagged line on a rectangle
-
- Posts: 51
- Joined: Mon Sep 21, 2015 7:41 am
- Contact:
-
- Posts: 158
- Joined: Mon Jan 06, 2014 4:28 am
- Contact:
Re: Laser is cutting one jagged line on a rectangle
If you have spare I'd swap all the mirrors and lenses as a process of elimination. Does it do it all over the bed or just in one corner?
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Laser is cutting one jagged line on a rectangle
It seems mirrors or lens got lose. Plus, losing tension on belt or old belt may cause the problem
Marco
Marco
-
- Posts: 51
- Joined: Mon Sep 21, 2015 7:41 am
- Contact:
Re: Laser is cutting one jagged line on a rectangle
I am actually moving the machine to a new location in about a month, I will check the mirrors / belts ect when I re align the tube after the move. Thanks for the starting point!
Who is online
Users browsing this forum: No registered users and 47 guests