Hello,
When working with the parameters the "Apply" button never becomes active. I have tried making changes, then hitting Read, then Save, then Resett on the DSP. The changes don't seem to take affect on the movement of the laser head or the function of the keys on the DSP(they are opposite to what they should be). Thanks, Mark
Manuf. Parameters, "Apply" box is not active
-
- Posts: 10
- Joined: Thu Oct 04, 2018 3:42 am
- Contact:
-
- Posts: 4649
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Manuf. Parameters, "Apply" box is not active
What you need to do is "Read, change, then Save". It will ask you for the password. Put down "608" and Reset the controller, the new setting should be taken in effect.
Marco
Marco
-
- Posts: 10
- Joined: Thu Oct 04, 2018 3:42 am
- Contact:
Re: Manuf. Parameters, "Apply" box is not active
Knowing the sequence of saving the changes helped. Thanks
Who is online
Users browsing this forum: No registered users and 2 guests