Changing *.ud5 parameters - SOLVED

Post Reply
neuman5022
Posts: 27
Joined: Sat Aug 22, 2015 7:15 pm
Contact:

Changing *.ud5 parameters - SOLVED

Post by neuman5022 »

Hi Guys,

I am using the machine with the USB disk only. Have no problem to load the file into machine.

Now in case I am not happy with the settings within the file - is here a way to change those settings in the machine itself or do I need to reprogram the file on the PC ?

For example - suppose I drew a box and set the power to 50% and speed to 200. Doing the cut I see I need to change the speed to 100. Is there a way to change the speed to 100 when re-running the file without having to go back to the PC ?

Changing the settings on the main menu does not help me because when re-running the file, the speed goes back to 200...

Am I doing something wrong ?

Cheers

Isaac
Last edited by neuman5022 on Tue Mar 06, 2018 4:44 pm, edited 1 time in total.
SWMS
Posts: 158
Joined: Mon Jan 06, 2014 4:28 am
Contact:

Re: Changing *.ud5 parameters

Post by SWMS »

You’ll have to resend the file from the PC.
neuman5022
Posts: 27
Joined: Sat Aug 22, 2015 7:15 pm
Contact:

Re: Changing *.ud5 parameters - SOLVED

Post by neuman5022 »

No, I don't ;)

Here is what I did and it works fine for me:

1. On main screen you hit ENTER

2. Set cursor to FILE and hit ENTER - this will bring you to FILE PARAMS SETTINGS

3. Arrow down to LAYER PARAMS SETTINGS - and press ENTER

4. Arrow down to SPEED (MM/S) change numbers and DO NOT FORGET TO PRESS ENTER.

This will change your file speed settings when re-running the file.

This should be done to every layer (colour) you want to change speed and/or power settings.

Cheers

I.
Post Reply

Return to “DSP X7”

Who is online

Users browsing this forum: No registered users and 15 guests