X7 controller not saving WP or hardware limit

spk64 · Post by **spk64** » Mon Dec 28, 2015 1:10 pm

Having problems with X7 controller not saving the settings for water protect or hardware limits.
I am using PW 608 on the controller.
Anyone else seeing this problem?

Techgraphix · Post by **Techgraphix** » Mon Dec 28, 2015 1:19 pm

Correct.. This is a known "bug" in the combination X7 and LaserCad.. (apparently still not solved)
Just neglect the settings in LaserCad and set them in the X7 directly:

Press Stop an Shift to enter the manufacturer setting and alter the WP settings there..

Kees

Tech_Marco · Post by **Tech_Marco** » Mon Dec 28, 2015 2:02 pm

Actually it isn't a bug. The programmer intended to do that way out of some reason. I already discussed with him and he will try to add it back to the LaserCad. It may 5ake a while because he is working on a new baby DSP controller for me.

Marco

spk64 · Post by **spk64** » Mon Dec 28, 2015 2:33 pm

I found lots of good info here. Also had the stop shift combo.
viewtopic.php?f=8&t=2783&p=13378&hilit=Password#p13378
All is working great now!

Thanks,

Lightobject.com Support Forum

X7 controller not saving WP or hardware limit

X7 controller not saving WP or hardware limit

Re: X7 controller not saving WP or hardware limit

Re: X7 controller not saving WP or hardware limit

Re: X7 controller not saving WP or hardware limit

Who is online