New PR530, spacing for focus
Posted: Fri Jan 19, 2018 9:33 pm
Got my new PR530 set up and running and it works great. Makes me want to ditch the Leetro controller in my other machine and upgrade it to one of the LO ones.
Does anyone know what the focal distance is from the nozzle to the material? I know that the lens has a focal length of 50.8mm and based on my measurements I made a 20mm spacer to focus from the nozzle and that seems to work just right, but if there was a more exact number I would like to know. I could not find any documentation on the machine hardware beyond the controller docs on this forum and the machine didn't come with any hard copy documents.
Does anyone know what the focal distance is from the nozzle to the material? I know that the lens has a focal length of 50.8mm and based on my measurements I made a 20mm spacer to focus from the nozzle and that seems to work just right, but if there was a more exact number I would like to know. I could not find any documentation on the machine hardware beyond the controller docs on this forum and the machine didn't come with any hard copy documents.