Lasersoft vs Lasercad

Post Reply
BanksCNC
Posts: 19
Joined: Thu Aug 10, 2017 1:21 pm
Contact:

Lasersoft vs Lasercad

Post by BanksCNC »

Hello.. I've noticed in the FAQ /Readme that Lasercad is mentioned as the control software and on the instructions on how to do things. My T9 DSP uses Lasersoft witch from my understanding is the new software Marco has had created. How much different is Lasersoft from Lasercad? will Lasersoft/Lasercad instructions and howto's be basically the same or are they completely different beasts.

Thanks
Brandon
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: Lasersoft vs Lasercad

Post by Tech_Marco »

Those software shares a lot of common in terms on functions. Things that differentiated cards are the name of the software and the labeling. I have posted all software and you can download and install it for testing. You should find that they are 90% are common

Marco
BanksCNC
Posts: 19
Joined: Thu Aug 10, 2017 1:21 pm
Contact:

Re: Lasersoft vs Lasercad

Post by BanksCNC »

Cool...I like lasersoft so far I was just curious if they matched up. Is it possible to use Lasercad or other laser software with the T9?
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: Lasersoft vs Lasercad

Post by Tech_Marco »

No they are not compatible
Post Reply

Return to “Tips and new on the DSP & Software”

Who is online

Users browsing this forum: No registered users and 17 guests