*Update: Rotary support Patch for Ruida R6445G DSP laser controller *

Post Reply
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

*Update: Rotary support Patch for Ruida R6445G DSP laser controller *

Post by Tech_Marco »

Latest Update Oct 24, 2020

If you downloaded a patch "V15.01.20-LIB.upd" that I posted a week ago, you need to download the following new patch to replace it because there was a bug found from the previous version. It was still pointing a rotary to the Y axis but we need it to point the rotary to the 4th-axis (U axis). Please report to me if there is another issue! We're alliance of Ruida, Trocen, PH, and TopWisdom

With this new patch, the U axis is dedicated to a rotary attachment. Unlike the R6442G controller where you need to disconnect the Y-axis and hook it u to a rotary, load parameters for the rotary in order to enable the rotary.

Fix: Rotary was pointed to the Y-axis. Fixed: Rotary pointed to the U axis. Do not apply it to other controller. It is designed for the R6445G only!
download/DSP/Ruida/RDC6445G-V15.01.22-LIB.upd



Disclaimer
Use it at your own risk. We will not be liable or responsible for any failure or damage caused by the patch
Post Reply

Return to “DSP Laser Controller”

Who is online

Users browsing this forum: No registered users and 2 guests