Lightobject.com Support Forum

Posted: **Sat Nov 10, 2018 11:40 am**

Hi guys. Now I'm getting my build finalized after a bunch of small stumbles. Laser now fires from the software.

I noticed this when firing for a few seconds. I'm not sure if this is normal or not. Can anybody chime in on this? Brand new tube, chiller, etc...

https://vimeo.com/300071711?utm_source= ... 04&utm_cam

I am using water from my RO/DI unit fyi

Thanks!

Posted: **Sat Nov 10, 2018 7:36 pm**

This is totally normal. No worry at all.
If it was spark like or yellow, then it is time to get worry

Marco

Posted: **Sat Nov 10, 2018 7:44 pm**

Phew!! Thanks again Marco!!

Lightobject.com Support Forum

Plasma Dancing At Aperture ... arcing? Normal?

Plasma Dancing At Aperture ... arcing? Normal?

Re: Plasma Dancing At Aperture ... arcing? Normal?

Re: Plasma Dancing At Aperture ... arcing? Normal?