CO2 Laser Power Supply (40W,60W,80W,120W)

Post Reply
admin
Site Admin
Posts: 32
Joined: Sun Nov 16, 2008 10:09 pm
Contact:

CO2 Laser Power Supply (40W,60W,80W,120W)

Post by admin »

Connection of this manual is compitable to most power CO2 supply range from 40W to 130W.
What you need to pay attention is the water pump "P" or "W" terminal. You have to ground it in order to enable the PS. Power control VR is 5K ~ 10K 1/2Watt. To fire the laser without power control, what you need to do:
1) Connect +5V to the "IN"
2) Ground water pump
3) Connect +5V to "H" or ground the "L" (better to use a push button to serves as a Fire button)

In some model, there is D+ D- instead of the "H", "L" and you use it to serves as a Fire button
Attachments
PowerSupply60W.jpg
PowerSupply60W.jpg (98.38 KiB) Viewed 8352 times
PS100W500.jpg
PS100W500.jpg (75.94 KiB) Viewed 8352 times
SZ80WPowerSupplyManual.pdf
(188.63 KiB) Downloaded 3994 times
130WCo2PS.jpg
Post Reply

Return to “Laser power supply”

Who is online

Users browsing this forum: No registered users and 1 guest