Has anyone got a wiring diagram for these switches please.
Cheers
Pete
Capactive Proximity Sensor Switch
-
- Posts: 16
- Joined: Sat May 30, 2015 1:40 am
- Contact:
-
- Posts: 492
- Joined: Fri Jan 20, 2012 1:39 pm
- Location: Appelscha, the Netherlands
- Contact:
Re: Capactive Proximity Sensor Switch
Don't know the type you have but if it has 3 wires: Brown, Black and Blue, then connect it as follows:
Brown +V (normaly from 5 - 30V but check the datasheet)
Blue GND
Black Output, depending on your type it will switch to GND when triggered or open or even switch to +V....
Kees
Brown +V (normaly from 5 - 30V but check the datasheet)
Blue GND
Black Output, depending on your type it will switch to GND when triggered or open or even switch to +V....
Kees
-
- Posts: 16
- Joined: Sat May 30, 2015 1:40 am
- Contact:
Re: Capactive Proximity Sensor Switch
Thanks for the info, going upgrade the switches when I replace the controller so trying to work out everything.
Cheers
Pete
Cheers
Pete
Who is online
Users browsing this forum: No registered users and 7 guests