24V relay hookup questions

Post Reply
swamidog
Posts: 59
Joined: Mon Feb 03, 2014 3:28 pm
Contact:

24V relay hookup questions

Post by swamidog »

i bought one of the RM1HLE 25v relay modules

http://www.lightobject.com/24V-relay-br ... -P840.aspx

to control my air pump from output 1 on the DSP board.

on the AC side, i assume i want to use COM and NO, but i'm a little confused by the CH1/VREF/DC-/DC+ on the switching side.

can someone post a wiring diagram of how they have theirs configured?

thanks!
Meshal
Posts: 14
Joined: Wed Nov 27, 2013 10:17 pm
Contact:

Re: 24V relay hookup questions

Post by Meshal »

I used like this relay with arduino and it has the same concept as in your case : CH1 is your signal input , DC- is ground and DC+ is DC Voltage.
hope this will help ;)
swamidog
Posts: 59
Joined: Mon Feb 03, 2014 3:28 pm
Contact:

Re: 24V relay hookup questions

Post by swamidog »

Meshal wrote:I used like this relay with arduino and it has the same concept as in your case : CH1 is your signal input , DC- is ground and DC+ is DC Voltage.
hope this will help ;)
yes it did. thank you.. it works like a champ.

http://youtu.be/ueAd7Cw3PuU
Post Reply

Return to “Electronics”

Who is online

Users browsing this forum: No registered users and 1 guest